ESP8266 IOT Kit


Description:    

ESP8266 wifi module will be the highly recommended for Internet Of Things (IoT). The ESP8266 series, or family, of Wi-Fi chips is produced by Espressif Systems, a fabless semiconductor company.               

                                   Board comes with preloaded bootloader hence you don’t need any external programmers . It has numerous on-board peripherals to interface them with the main controller. All the peripherals connections are broken out. A unique feature of the kit is that, oneMicro base board supports various 8 bit, 16 bit and 32 bit microcontroller breakout boards.

Wi-Fi Protocols

  •  802.11 b/g/n/e/i support.
  •  Wi-Fi Direct (P2P) support.
  •  P2P Discovery, P2P GO (Group Owner) mode, GC(Group Client) mode and P2P Power Management.
  •  Infrastructure BSS Station mode / P2P mode / SoftAP mode support.
  •  Hardware accelerators for CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI
  •  (SMS4), WEP (RC4), CRC.
  •  WPA/WPA2 PSK, and WPS driver.
  •  Additional 802.11i security features such as pre-authentication, and TSN.
  •  Open Interface for various upper layer authentication schemes over EAP such as TLS, PEAP, LEAP, SIM, AKA, or customer specific.
  •  802.11n support (2.4 GHz).
  •  Supports MIMO 1×1 and 2×1, STBC, A-MPDU and A-MSDU frame aggregation and 0.4μs guard interval.
  •  WMM power low U-APSD.
  •  Multiple queue management to fully utilize traffic prioritization defined by 802.11e standard.
  •  UMA compliant and certified.
  •  802.1h/RFC1042 frame encapsulation.
  •  Scattered DMA for optimal CPU off load on Zero Copy data transfer operations.
  •  Antenna diversity and selection (software managed hardware).
  •  Clock/power gating combined with 802.11-compliant power management dynamically adapted to current connection condition providing minimal power consumption.
  •  Adaptive rate fallback algorithm sets the optimum transmission rate and Tx power based on actual SNR and packet loss information.
  •  Automatic retransmission and response on MAC to avoid packet discarding on slow host environment.

The board includes following on-board peripherals.

  • CP2102 based USB to Serial bridge.

  • SSD1306 based 128X64 OLED.

  • 4 Common anode Seven Segment displays

  • 5V Relay

  • 8 Pin DIP Switch

  • Rotary Encoder

  • MicroSD Slot

  • 8 flashing LED’s

  • LM35 based Temperature Sensor

  • Light Sensor (LDR)

  • 4X4 Keypad

  • RGB LED

  • DS1307 based Real Time Clock

  • AT24C16 based EEPROM

  • L293D based Dual Motor Driver

  • Magnetic Buzzer

The board also has few more features for the add on boards on it. Those are listed below.

  • Onboard programming circuit for ESP8266-01 Wifi module.

  • Bluetooth breakout for HC-05 module.

  • Breakout for HC-SR04 Ultrasonic Sensor.

  • Breakout for triple Axis accelerometer(ADXL335).

  • Breakout for 16X2 LCD Display.

  • Breakout for 128X64 Graphic LCD.

  • Power rails for 9V, 5V and 3.3V.

Board Dimension :

180mm X 135mm X 30mm ( L X W X H)

Downloads :





We are build this stuff, check back again soon!
We are build this stuff, check back again soon!